Verilink Access Manager 2000 (896-502037-001) Product Manua Manual de usuario descargar pdf (Pagina 217)

Configuration Options for AS2000 and ConnecT1 Plus

Access Manager 2000 User Manual

Installed and Operational

This setting should be the same as the Installed and

Operational option setting of the associated CSU.

Enable Alarm Reporting

This setting should be the same as the Enable Alarm Reporting

option setting of the associated CSU.

Save Configuration to DIU

To store the configuration from the database into the DIU, set the Save

configuration to DIU option to Y. If this option is set to N, any

updated changes are saved to the database but are not downloaded to the

DIU.

Connected CSU Shelf and Plug Numbers

Enter the Access System 2000 shelf number and plug-in slot number of

the CSU to which the DIU is connected. This setting allows the DIU to

send data to and receive data from that CSU over the DIU data bus

assigned to that module. The shelf number can be from 1 to 4.

Channel Assignment

Assign one or more DS0 channels of the DS1 line to each DIU 2130 and

DIU 1130 data port, based on the data equipment’s transmission speed

(EQP Speed). One channel is required for every 56 kbps or 64 kbps of

bandwidth.

For example, if the customer data equipment operates at 256kbps, it

needs four DS0 channels (4 channels x 64 kbps per channel = 256 kbps

bandwidth) for DS1 transmission.

There are three types of channels:

Contiguous The channel assignments are in numerical sequence (for

example: Port 1 = 1-3, Port 2 = 14-17, and so on, for the

ports of other DIUs used with the same CSU). Contiguous

channel assignments allow the DIU 2130 and DIU 1130

to interface properly with AT&T Accunet bundled DS0

applications.

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 399 400

Sin comentarios

Verilink Access Manager 2000 (896-502037-001) Product Manua Manual de usuario Pagina 217