Verilink Access Manager 2000 (896-502037-001) Product Manua Manual de usuario descargar pdf (Pagina 201)

Configuration Options for AS2000 and ConnecT1 Plus

Access Manager 2000 User Manual

If you set the Retrieve Far-End Data option to YES, you must

also set the Retrieve Near-End Data option to YES, and there

must be a circuit built between the near-end and far-end circuit elements.

Do not set Retrieve Far-End Data to YES at both the near-end

and far-end circuit elements. For example, set Retrieve Far-End

Data to YES for the near-end NCC, CCC, or TAC and set Retrieve

Far-End Data to NO for far-end circuit element. The defaults for

these options is NO, except near-end Net Use , which is YES.

This option must be set to YES and the Installed and

Operational option must also be set to YES to enable Access

Manager to configure the selected CSU circuit elements.

The options following Save Configuration to CSU are

downloaded to the CSU circuit element when is pressed. If this

option is set to NO, any changes made are saved in the database but are

not downloaded to the CSU circuit element.

CSUs can report alarm conditions to Access Manager when excessive

errors occur or the line service is degraded.

If you don’t want the CSU to report alarm conditions to Access Manager,

your choice is simple. Set the Enable Alarm Reporting field to

NO.

To allow the CSU to report alarm conditions to Access Manager:

1. Set Enable Alarm Reporting to YES.

2. Make sure that in the Node Configuration screen of the parent node,

you have:

• set the Enable Alarm Reporting to YES

• downloaded the alarm path for that node

Otherwise, the CSU will send alarms to the node controller, but the

node controller will not forward these alarms to Access Manager.

Save

Configuration to

CSU

Enable Alarm

Reporting

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 399 400

Sin comentarios

Verilink Access Manager 2000 (896-502037-001) Product Manua Manual de usuario Pagina 201