Verilink 8100A (34-00237) Product Manual Manual de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 311
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
3-6 8000 Series
NOTICE: Some voice gateways with this feature require a read-write community
name of LESEOC to be configured in the IAD.
The SNMP Configuration menu is accessible from the Main menu. You may
enable SNMP via IP, EOC, or both. Traps may be sent to a configurable IP
address, the EOC, or both. The System Contact, System Name, and System
Location may also be configured. These values are accessible via the RFC
1213 MIB.The IAD supports the following SNMP settings:
System Contact
System Name
System Location
SNMP Community
SNMP Trap Host IP Address
The following SNMP traps are supported:
System reset
Attempts to access SNMP with an invalid community name
Starting and stopping TFTP within SNMP
The IAD supports MIBs for RFCs 1213, 1317, 1406, 1493, and 1463 as well
as af-vmoa-0174 (AAL2/LES MIB).
SNMP Configuration Menu
To display the SNMP Configuration menu, type “7 on the Main menu. Each
of the menu’s configuration options is described below.
Figure 3.2
SNMP Configuration Menu
NOTICE: The strings you enter in SNMP are not case sensitive.
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 310 311

Comentarios a estos manuales

Sin comentarios