Verilink 8100A (34-00237) Product Manual Manual de usuario descargar pdf (Pagina 216)

5-32 8000 Series

Type “A” on the Reports menu to display the information shown in the table

below about mappings between Ethernet Media Access Control (MAC)

addresses (hardware addresses) and IP addresses.

Bridge Forwarding Database Report

To display information about mappings between Ethernet addresses and

devices connected to the LAN, type “B” on the Reports Menu. The IAD

displays the report shown in the table below.

You must enable bridging for this information to display. For more

information on enabling bridging, refer to Bridge Configuration Menu on

page 4-55.

Bridge Status Report

To display information about bridging, type “S” on the Reports Menu. The

IAD displays a record for each interface as shown in the table below.

Parameter Description

IP Address IP address that corresponds to the MAC address

Ethernet Address Ethernet address of the device; assigned by the

manufacturer

Age Timer Seconds until the ARP entry expires

State Incomplete, Complete, and Expired

Interface The interface for the Ethernet address

Parameter Description

Ethernet Address Ethernet address of the device; assigned by the

manufacturer

Interface Interface for the Ethernet address

Port Port for the Ethernet interface

Timer No. of seconds until this entry deletes from the

database. The time counts down from the bridge

database aging time value, in one-second intervals; at

zero, the entry deletes from the database

Parameter Description

Interface interface for the active slot for bridging

Port port for the preceding interface

Spanning Tree Protocol (STP) enable | disable

State Spanning tree state: disabled | blocking | listening |

learning | forwarding

Root root port for the bridge—yes | no

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 310 311

Sin comentarios

Verilink 8100A (34-00237) Product Manual Manual de usuario Pagina 216