Verilink 8100A (34-00237) Product Manual Manual de usuario Pagina 169

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 311
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 168
Configuration 4-95
For the IAD to display this information, you must attach DHCP Client
devices that use DHCP to obtain an IP address from the IAD.
Display DHCP Server Assigned and Unassigned
Addresses
Type “A on the DHCP Server Configuration menu to display DHCP Server
Assigned Addresses, or type “U” to display DHCP Server Unassigned
Addresses. The IAD displays the following information about the DHCP
Server assigned addresses:
For the IAD to display this information, you must attach DHCP Client
devices that use DHCP to obtain an IP address from the IAD.
Display DHCP Entry Details
Type “D on the DHCP Server Configuration menu to display DHCP entry
details. The IAD displays the following information about the DHCP entries:
acks sent
nacks sent
requests for other servers
protocol errors
Field Description
IP IP address of the device, assigned by the IAD.
Client ID Ethernet MAC address for the device.
Status How the IP address is assigned to the device—via DHCP
or manually.
Value Description
IP address IP address of the device.
Client ID Ethernet MAC address for the device.
Status how the IP address is assigned to the device—via DHCP
server, or manually.
Subnet IP subnet mask; number of bits reserved for host ID.
Gateway IP address of packets sent to destination.
Lease length of time to keep the Internet connection active.
Type type of IP address: static or dynamic.
Name name of the device.
TFTP server IP address of the TFTP server
1st DNS server IP address of the 1st DNS server
Statistics
Vista de pagina 168
1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 310 311

Comentarios a estos manuales

Sin comentarios