Verilink 8100A (34-00237) Product Manual Manual de usuario Pagina 139

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 311
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 138
Configuration 4-65
Set CAS Protocol
Type “1 or “2” on the AAL2/LES CAS Configuration menu to select
which CAS protocol to use.
Set CAS Refreshing
Rate
1 Type “R” on the AAL2/LES CAS Configuration menu to set the CAS
refresh rate.
2 Enter a zero (“0) to disable CAS refresh, or enable CAS refresh by
entering a non-zero refresh rate value. The IAD displays the AAL2/LES
Manual Configuration menu.
3 Reset the IAD before enabling Idle CAS refresh.
Enable/Disable Idle
CAS Refreshing
1 Type “I on the AAL2/LES CAS Configuration menu to enable or disable
idle CAS refreshing. You can only enable idle CAS refresh when CAS
refresh is enabled (immediately preceding).
2 Type “E” to enable Idle CAS refresh, or D to disable Idle CAS refresh. The
IAD displays the AAL2/LES Manual Configuration menu, and indicates in
the message section that the change in the Idle CAS refresh will take place
when the IAD is reset.
Change Maximum CPS-SDU Size; 45/64 Octets
Type “S on the AAL2/LES Manual Configuration menu to switch the
maximum CPS payload size between 45 and 64 octets. The IAD displays the
AAL2/LES Manual Configuration menu. Included in the settings is a payload
size message indicating 45 or 64 octets.
Set “Combined Use” Timer
1 Type “T” on the AAL2/LES Manual Configuration menu to modify the
combined use timer (in 5 ms increments).
2 Type the new timer period and press Enter. The IAD updates the setting and
displays the menu.
Enable/Disable User State Control
Type “U on the AAL2/LES Manual Configuration menu to enable or disable
user state control by toggling the state. The IAD displays the AAL2/LES
Manual Configuration menu. Included in the settings is a USC message
indicating that it is enabled or disabled.
Manual ATM Pace Control
Type “A to set ATM Pace Control manually.
Vista de pagina 138
1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 310 311

Comentarios a estos manuales

Sin comentarios