Verilink 8100A (34-00237) Product Manual Manual de usuario descargar pdf (Pagina 133)

Configuration 4-59

1 On the Bridge Configuration menu (Figure 4.69), type “Q” to select

Configure Spanning Tree Port Priority. The IAD displays the interfaces

available on this IAD as shown in Figure 4.60

2 Type the number of the interface for which you want to set the priority. The

IAD displays a port table. If more than one interface is configured on the

selected port, the IAD displays a list of interfaces:

3 Type the number of the port. The IAD prompts you to enter a priority for the

selected Slot and Port.

4 Type the priority value and press Enter. The IAD updates the configuration

and displays the Bridge Configuration menu.

5 Repeat these steps for each port on which you want to set the priority.

6 Continue with other configuration tasks, or press Escape to return to the

Bridge Configuration menu.

Configure Spanning Tree Hello Time

To set the Spanning Tree hello time (a value between 1 and 10 seconds—

default 2), follow the steps below:

1 Type “H” on the Bridge Configuration menu (Figure 4.69) to select

Configure Spanning Tree Hello Time. The IAD prompts you to enter the

Bridge Hello Time.

2 Type the value and press Enter. The IAD updates the configuration.

3 Press any key to return to the Bridge Configuration menu and continue with

other configuration tasks.

Configure Spanning Tree Maximum Age

To set the Spanning Tree maximum age, (a value between 6-40 seconds—

default 20), follow the steps below.

1 Type “S” on the Bridge Configuration menu (Figure 4.69) to select

Configure Spanning Tree Max Age. The IAD prompts you to enter the

Spanning Tree Max Age.

2 Type the maximum age value and press Enter. The IAD updates the

configuration.

3 Press any key to return to the Bridge Configuration menu and continue with

other configuration tasks.

Configure Spanning Tree Forward Delay

To set the Spanning Tree forward delay (a value between 4-30 seconds—

default 15), follow the steps below.

1 Type “F” on the Bridge Configuration menu (Figure 4.69) to select

Configure Spanning Tree Forward Delay. The IAD prompts you to enter the

Spanning Tree Forward Delay.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 310 311

Sin comentarios

Verilink 8100A (34-00237) Product Manual Manual de usuario Pagina 133