Verilink FrameStart FSM (34-00299.E) Product Manual Manual de usuario descargar pdf (Pagina 90)

4-16 FrameStart FSM

NOTICE: Always verify that a DHCP server is available on the network before

enabling DHCP Client. If, on power-up, a DHCP server is not found, a

60-second timeout will occur.

Client Identifier

Displays a unique identifier for a specific IP address.

Physical Address

Displays unique MAC address.

NOTICE: Always verify that a DHCP server is available on the network before

enabling DHCP Client. If, on power-up, a DHCP server is not found, a

60-second timeout will occur.

NOTICE: If you manually change the IP address, you must “Save and Restart.”

(See Save and Restart on page 4-6.)

Supervisory Configuration Screen

The Supervisory Config screen (Figure 4.11) displays the current speed of the

Supervisory port interface.

Figure 4.11

Supervisory Config Screen

The Supervisory screen lets you view and change the Supervisory port speed.

The Supervisory port only supports asynchronous character formats.

Speed

Changes the Supervisory port speed (in bits per second).

Values: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Default: 19200

Character Size

Selects the number of bits required to make up one asynchronous character.

Values: Five, Six, Seven, Eight

Default: Eight

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 152 153

Sin comentarios

Verilink FrameStart FSM (34-00299.E) Product Manual Manual de usuario Pagina 90