Verilink PRISM 3010 Dual DSX-1 (34-00250.2) Product Manual Manual de usuario

i34-00250.2 May 1999PRISM 3010-300 Dual DSX

4 CHAPTER 2: OPERATIONFraming TypeSelects the type of framing for the DSX port. The 3030 and 3060 permits framing conversion from the DTE to the Net

Diagnostics 5For the Dual DSX card, the supported loop (see Figure 2-6) is for the local interface only. The NEAR selection invokes a loopback at

6 CHAPTER 2: OPERATION

3TERMINAL OPERATIONIntroductionThis chapter describes the screens and menus applicable to the Dual DSX card that are associated with the PRISM 3030 an

8 CHAPTER 3: TERMINAL OPERATIONAlarms ScreenThe Alarms screen (Figure 3-3) is used to view the current alarm status of the network and the DTE lines

Maintenance Screen 9MaintenanceScreenThe Maintenance screen (Figure 3-4) allows performing test and maintenance functions on the T1 circuit. BERT

10 CHAPTER 3: TERMINAL OPERATIONLoopbacksThe following loopbacks can be invoked from the Maintenance screen.Normal OperationThis diagram depicts the

Maintenance Screen 11NET MLBThe network maintenance loopback command loops data at the T1 DTE port back toward the network (passes network data t

12 CHAPTER 3: TERMINAL OPERATIONPort LoopUsed to loop a high-speed DTE at the near or far end. High-speed port loops are bidirectional. Figure 3-11

Configuration Screen 13Start Test. Pressing Enter with the cursor on the (START TEST) option starts the selected test pattern. TEST IN PROGRESS

iiCopyright NoticeCopyright © 1999 Verilink Corporation. All rights reserved.This document does not create any express or implied warranty about Veril

14 CHAPTER 3: TERMINAL OPERATIONThis screen has the following fields, most of which have user-selectable options. To send the new line configuration

Configuration Screen 15Setting IDLESets the specified channel to transmit idle code on the DSX port and ignore received data. THRUSets the specif

16 CHAPTER 3: TERMINAL OPERATION

Canadian Emissions Requirementsiii7 In the event of equipment malfunction, all repairs should be performed by our company or an authorized agent. It i

ivSafety PrecautionsWhen handling this equipment, follow these basic safety precautions to reduce the risk of electricshock and injury: •Follow all wa

vTable of ContentsCopyright Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iiTrademarks . . . . . . . . . . . . . . . . .

vi

1INSTALLATIONIntroductionThis chapter contains information and instructions required to prepare the Verilink 3010-300 for use. Included are initial in

2 CHAPTER 1: INSTALLATIONOption CardInstallation The 3010-300 card fits into slots 2 or 3 of a 3030 or slots 2 through 6 of a 3060.WARNING: To preve

2OPERATIONIntroductionThis chapter describes the screens and menus associated with the PRISM 3030 and 3060 front panel LCD interface for the Dual DSX