Verilink FrameStart FSM (34-00299.E) Product Manual Manual de usuario descargar pdf (Pagina 72)

3-48 FrameStart FSM

Figure 3.36

Password Screen

To change the password, you must enter it once in the New Password field

and then re-enter the same password in the Confirm Password field. After

entering the new password in both these fields, click the “Change Password”

button to update and establish the new password.

NOTICE: Remember that passwords are case-sensitive and are limited to no more

than 10 characters. When logging on, password must be entered exactly

as it was programmed.

Log Out

The Log Out screen (Figure 3.37) is used to log you off the Web Server. The

Log Out function is only available after user password protection has been

set. You will be automatically logged out of the system 1 hour after you log

on using a password to gain access; after this, you will be required to enter

the password to gain write access.

Figure 3.37

Log Out Screen

In-band Management

There are two ways to implement remote in-band management of an FSM

unit. The first is to use the local router to route management frames (Web

browser or SNMP) between the local LAN and the remote unit. The second is

to use the local FSM unit as an independent gateway.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 152 153

Sin comentarios

Verilink FrameStart FSM (34-00299.E) Product Manual Manual de usuario Pagina 72