Verilink FrameStart FSM (34-00299.E) Product Manual Manual de usuario Pagina 100

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 153
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 99
4-26 FrameStart FSM
Allow CHAP
This parameter lets the peer negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username
Type the appropriate PAP Username in this field to log on to the peer.
Values: (user established)
Default: Username
PAP Password
Enter the password necessary to log on to the peer under a given PAP
Username.
Values: (user established)
Default: (none)
CHAP Username
Type the appropriate CHAP Hostname in this field to challenge the peer.
Values: (user established)
Default: Hostname
CHAP Secret
Enter the Secret (i.e., password) necessary to challenge the peer.
Values: (user established)
Default: Secret
Initiate Negotiation
Determines whether the port actively negotiates with the peer site or passively
waits for negotiation requests.
Values: Yes, No
Default: Yes
Parameters to Negotiate
The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters
should be negotiated by selecting the desired option. The table below
describes the parameters that can be negotiated.
Parameter Description
Protocol Header
Compression
Compresses PPP protocol headers.
Default = Yes
IPCP Compression Compresses TCP headers using Van Jacobsen compression.
Default = Yes
MRU Informs the peer that the implementation can receive larger
packets, or requests that the peer send smaller packets.
Default = Yes
HDLC Address
Compression
Negotiates the compression of high-level data link control
(HDLC) addresses.
Default = Yes
IP Address Dynamically negotiates for IP addresses; otherwise, it is
assumed both sides know each other’s IP addresses.
Default = Yes
Vista de pagina 99
1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 152 153

Comentarios a estos manuales

Sin comentarios