Verilink PRISM 3000 (34-00184) Product Manual Manual de usuario

TRANSPORT®IntroductionReference Manual34-00184 3rd EditionPRISM3000

PRISM 30001-6 GeneralThe user may also require the following equipment optionsfor the installation and operation of the PRISM unit. Table 1-2 Optional

Installation 2-1PRISM 3000Installation2.0 IntroductionThis chapter contains information and instructions requiredto prepare the TxPORT PRISM 3000 for

PRISM 30002-2 InstallationAC VersionlONC C NO GND110/220 VAC 1.0A .4A/.2ANMSINALARMRELAYETHERNETPORT 2 PORT 1PORT 3PORT 4NMSOUTSUPVSTACLKT1DTET1NETDC

Installation 2-3PRISM 30002.5 Data Port ConnectionsThe PRISM 3000 is available with 2 or 4 high speed dataports installed in Ports 1 through 4 on the

PRISM 30002-4 Installationstation clock is commonly available as a 64 kHz, bipolarRTZ signal referred to as a ‘composite clock’. The unit will also ac

Installation 2-5PRISM 3000elements is connected in an NMS chain, the EM8000 maybe connected to the supervisory port of any one of the ele-ments. This

PRISM 30002-6 InstallationThe user must attach the appropriate MAU (media attach-ment unit) for connection to the existing LAN medium.MAUs are availab

Operation 3-1PRISM 3000Operation3.0 IntroductionThis chapter describes the screens and menus associatedwith the TxPORT PRISM 3000 front panel LCD inte

PRISM 30003-2 Operation3.1.2 PasswordIf no password has been programmed, the password promptwill not appear and the PRISM 3000 proceeds directly to th

Operation 3-3PRISM 3000When the element is a user selectable function, pressing<Select> moves the cursor to the right with the arrow point-ing l

GeneralIntroduction ... 1-1Design Highlights ...

PRISM 30003-4 Operationthe ‘Timing’ menu. The choices are ‘Nx56K’, ‘Nx64K’,and ‘1.544 MHz’. Station Timing: This field selects the ‘N’ multiple when‘S

Operation 3-5PRISM 3000This menu also displays ‘Rem Comm’ (channels assigned asremote communication channels) and ‘Port X’ (channelsassigned to ports

PRISM 30003-6 OperationCTS/DSR/DCD Control: Setting any of these three fieldsto ‘FORCE TRUE’ or ‘FORCE FALSE’ allows the forcing ofthe port control le

Operation 3-7PRISM 3000is ON, the transmit data from the DTE is sent to the remoteend, and when RTS is OFF, idle code is sent to the remoteend. If set

PRISM 30003-8 OperationDevice Info: This field displays the Ethernet or Token Ringhardware/software revision level. 3.7 DiagnosticsThe ‘Diagnostics’ s

Operation 3-9PRISM 3000Pattern Sync Losses: This field displays the number oftimes during the test period that the BERT patterndetector lost sync.Rese

PRISM 30003-10 Operationrecorded by interval. Counting will stop when the maxi-mum value of 65535 is reached.Clear ESF Stats: When ‘YES’ is selected,

Operation 3-11PRISM 3000User Info/Unit ID: The idle screen top line may bechanged in this field. Text is entered using the up and downarrow keys to sc

PRISM 30003-12 Operationblank). If the secondary number fails, the unit waits 5minutes and then attempts to communicate with the pri-mary number again

Terminal Operation 4-1PRISM 3000Terminal Operation4.0 IntroductionThis chapter describes the screens and menus associatedwith the TxPORT PRISM 3000 te

Copyright © 1994 TxPORT, All rights reserved. No part of this publication may be reproduced, trans-mitted, transcribed, stored in a retrieval system,

PRISM 30004-2 Terminal Operationto the network T1 interface) on the second line. Refer to thisinformation when contacting the factory with inquiries.

Terminal Operation 4-3PRISM 3000cursor can be moved to a field, it is a user selectable field.All other fields are for display only. User selectable f

PRISM 30004-4 Terminal OperationNOTE: The parameters shown on the Alarms Screenare updated at five second intervals. Power Loss Seconds: This field di

Terminal Operation 4-5PRISM 3000function, press <return> on ‘YES’. All values for the cho-sen register set (NET or DTE) are then reset to zero.

PRISM 30004-6 Terminal Operation4.5 Maintenance Screen The ‘Maintenance’ screen (Screen 4-5 on page 4-6) allowsthe user to perform test and maintenanc

Terminal Operation 4-7PRISM 3000Pattern Sync: This field displays the current state of pat-tern sync during a test. If no test is in progress, ‘NO TES

PRISM 30004-8 Terminal OperationNormal OperationNetwork InterfaceTo NetworkFrom NetworkRJ48CFramer/Deframer Multiplexor Receivers/DriversReceivers/Dri

Terminal Operation 4-9PRISM 3000DTE MLB Network Interface Framer/Deframer Multiplexor Receivers/DriversReceivers/DriversBERT Generator/DetectorEIA530

PRISM 30004-10 Terminal OperationThis screen has the following fields, most of which haveuser selectable options. To send the new line configurationto

Terminal Operation 4-11PRISM 3000exit and then reenter this screen to ensure that all theparameters have been updated. T1-DTE Framing: Selects the typ

ascom Timeplex Transport 3000 CSU/DSU User’s Guide MC15___ January 1994

PRISM 30004-12 Terminal Operation4.6.3 Port ParametersThe ‘Port Configuration’ screen (Screen 4-8) sets the oper-ating parameters for each high speed

Terminal Operation 4-13PRISM 3000is composed of SDLC type protocols. The choices are ‘YES’and ‘NO’. CTS/DSR/DCD Control: Setting any of these three fi

PRISM 30004-14 Terminal OperationSNMP traps. When a network alarm occurs, the unit sends atrap message to up to 6 destinations on the user’s network.T

Terminal Operation 4-15PRISM 30004.7 Utilities Screen The ‘Utilities’ screen (Screen 4-12) handles the functionsdescribed in the following paragraphs.

PRISM 30004-16 Terminal OperationThe unit attempts 3 times to connect using the primary num-ber. If all 3 attempts fail, it will attempt 3 times to co

IndexAAlarm Connection 1-3, 2-4Alarm Cutoff 3-12Alarm Notification 4-16Alarm Parameters 3-4, 3-11, 4-3, 4-11BBERT 3-8, 3-9, 4-6, 4-8Boot Mode 3-

General 1-1PRISM 3000 General1.0 IntroductionThe PRISM 3000 supports all data networking needs, fromconnection of a single front end processor to shar

PRISM 30001-2 General• D4 or ESF line framing • AMI or B8ZS line coding • Supports fractional T1 services with flexible bandwidth allocation • Built-i

General 1-3PRISM 3000 Interface Standards: Internet RFC1157 (SNMP)RFC1213 (MIB-II)RFC1406(DS1MIB)Token Ring InterfaceNetwork Protocol: TCP/IP based ne

PRISM 30001-4 Generalcompliance could void the user’s authority to operate theequipment.This device complies with Part 15 of the FCC rules. Opera-tion

General 1-5PRISM 3000 • Mode of shipment required (second day air is the normal mode of shipment for all returned material unless other-wise specified