Verilink PRISM 3000 (34-00184) Product Manual Manual de usuario descargar pdf (Pagina 12)

PRISM 30002-2 Installation

AC Version

NC C NO GND

110/220 VAC 1.0A .4A/.2A

NMS

ALARM

RELAY

ETHERNET

PORT 2 PORT 1PORT 3PORT 4

NMS

OUT

SUPV

STA

CLK

DTE

NET

DC Version

1 2 3

OFF

250 V

DCV RET GND

1098764 11 12 14

Figure 2-1 PRISM 3000 Rear Panel

Index Control/Indicator Function

1 DC Power Switch This switch turns the DC power ON or OFF.

2 DC Fuse This DC fuse is rated at 2.0 Amp.

3 DC Connection 48 VDC power is connected to ‘DCV’; the return is connected to ‘RET’. See Section 2.11.2 on page 2-6.

4 AC Connection This 110/220 VAC power receptacle is rated at 50-60 Hz, 0.6 A / 0.3 A. See Section 2.11.1 on page 2-6.

5 AC Fuse This AC fuse is rated at 1.0 Amp and is shipped with a spare.

6 AC Power Switch This switch controls the AC power (position

is ON and position

is OFF).

7 Alarm Relay The ‘Normally Closed’ alarm connects to NC & C. The ‘Normally Open’ alarm connects to NO & C.

8 NMS This is the network management system input/output. Refer to Section 2.10.1 on page 2-4.

9 SUPV Supervisory port connection. Refer to Section 2.10.2 on page 2-4.

10 Station Clock The N x 56/64 kHz or 1.544 MHz external station clock connector. Refer to Section 2.9 on page 2-3.

11 T1 DTE The T1 DTE port for drop and insert applications. Refer to Section 2.6 on page 2-3.

12 T1 NET The T1 network port. Refer to Section 2.7 on page 2-3.

13 Slot 1 - Ethernet This is the 15-pin Ethernet or Token Ring connection. Refer to Section 2.10.3 on page 2-5.

14 Ports 1 through 4 Two cards with up to two ports each may be inserted into each of these slots. Ports 1 and 2 show a combi-

nation of V.35 and EIA530 cards.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 44 45

Sin comentarios

Verilink PRISM 3000 (34-00184) Product Manual Manual de usuario Pagina 12