Verilink WANsuite 5130 (34-00298.L) Product Manual Manual de usuario descargar pdf (Pagina 91)

Web Server Interface 3-59

Errored Seconds

Displays the number of asynchronous errored seconds that have been detected

since the test began or since error statistics were last cleared.

% EFS

Displays the percentage of time the test ran error-free. This ratio is derived

from the number of error free seconds divided by the number of seconds

accumulated in Elapsed Time.

Loop Table on Serial Interface Test Details Screen

The Loop table provided near the bottom of the Test Details screen lets you

specify the type of Loop test to be performed. The types of tests available for

you to choose from depend on the currently selected interface. Loopback

diagrams are shown in Appendix A, Figure A.1.

Values: No Test, Port Loop, V.54 Loop, Far V.54 Loop

Default: No Test (Loop Down)

The Test Details screens provide the following user-activated buttons:

Trap Log Screen

The Trap Log screen (Figure 3.48) shows a collection of all the traps that

have been generated. A trap is a mechanism that permits a device to send an

alarm for certain network events to an SNMP management station; in other

words, traps are notifications of triggered alarms.

The table shown in this screen lists each trap by its Index number, and

displays the type of error captured by the trap (Trap Number), the date and

time the trap was stored (Time Stamp), its description, and its value.

To remove all trap information stored in memory, click the “Delete All

Traps” button.

Button Function

Start Starts the specified BERT.

Stop Stops the currently running BERT.

Error Inject Injects a bit error.

Reset Errors Resets the current error count.

Loop Submit Sets the type of Loop test.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 262 263

Sin comentarios

Verilink WANsuite 5130 (34-00298.L) Product Manual Manual de usuario Pagina 91