Verilink WANsuite 5130 (34-00298.L) Product Manual Manual de usuario descargar pdf (Pagina 235)

Front Panel LCD Interface 5-17

In Slave mode − timing parameter is ignored in Slave mode

In Network mode − Internal, Network 2, Serial 2

Definitions of the timing sources are as follows:

Internal – The unit’s internal frequency standard (T1 1.544 Mbps ± 50 bps)

is used for all timing.

Network 2 – Timing is derived from the Network port recovered clock.

Serial 2 – Timing is derived from the Serial port recovered clock.

Zero Suppression

Determines whether ones density insertion is activated after 15 zeros. This

parameter is ignored if the Coding parameter is set to “B8ZS”.

Values: Disable, Enable

Default:Disable

PRM

Lets you establish which performance messaging standard will be employed

to initiate Performance Report Message (PRM) functions. Setting this field to

“Enable” instructs the unit to use ANSI T1.403, which sends a PRM once

every second. Setting this field to “Disable” instructs the unit to use AT&T

TR54016, which provides performance reporting on request only.

Values: Disable, Enable

Default:Disable

Channel Map Menu

The Channel Map menu allows channels to be allocated/unallocated to the

Net 2 interface. The values for this option are as follows:

• Idle − Channel not allocated

• Thru − Allocated to NET 2

• T+Sig − Allocate and Signaling enabled

There is no default value for this option.

Serial 1 and Serial 2 (5160) or Serial (5130) Configuration

Menus

The SERIAL INTERFACE #1 and SERIAL INTERFACE #2 configuration

menus on the WANsuite 5160 and the SERIAL INTERFACE on the

WANsuite 5130 let you view and make changes to the unit’s serial interface

configurations.

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 262 263

Sin comentarios

Verilink WANsuite 5130 (34-00298.L) Product Manual Manual de usuario Pagina 235