Verilink WANsuite 5130 (34-00298.L) Product Manual Manual de usuario descargar pdf (Pagina 231)

Front Panel LCD Interface 5-13

and to move to the next value in the address. Pressing the SELECT button

while the blinking cursor is on the last digit enters the value and returns to the

previous screen. Pressing the

EXIT button at any time while entering an IP

address aborts the edit.

Subnet Mask

This menu lets you define the network portion of the unit’s IP address.

To establish the Subnet Mask (a number used to identify a subnetwork), press

the

SELECT button to activate a blinking cursor over the first digit’s location

(an “x”) in the field, indicating that the value is selected for change. Press the

SCROLL button to incrementally change the selected digit’s value (0-9). When

the desired value for a selected portion of the field is displayed, press the

SELECT button to set that value and to move to the next value in the field.

Pressing the

SELECT button while the blinking cursor is on the last digit

enters the value and returns you to the previous screen. Pressing the

EXIT

button at any time while entering a Subnet Mask aborts the edit.

Gateway Address

This option lets you define the IP address of the default gateway (router) on

the LAN side of the unit.

To establish the Gateway Address, press the

SELECT button to activate a

blinking cursor over the first digit’s location (an “x”) in the address,

indicating the value is selected for change. Press the

SCROLL button to

incrementally change the selected digit’s value (0-9). When the desired value

for a selected portion of the address is displayed, press the

SELECT button to

set that value and to move to the next value in the address. Pressing the

SELECT button while the blinking cursor is on the last digit enters the value

and returns you to the previous screen. Pressing the

EXIT button at any time

while entering a Gateway address aborts the edit.

DHCP Client

If DHCP Client is enabled at power-up, the unit will request its IP, Mask, and

Gateway addresses from a DHCP server located on the LAN side of the unit,

and the unit will use these addresses. If the DHCP request is unsuccessful, the

unit will use the configured addresses shown on this screen.

NOTICE: Always verify that a DHCP server is available on the network before

enabling DHCP Client. If, on power-up, a DHCP server is not found, a

60-second timeout will occur.

Ethernet

Enables or disables a remote unit’s Ethernet port.

Network 1 (5160) or Network (5130) Configuration Menu

Use the NET 1 or NET CONFIG menu to set up parameter values for the T1

port labeled as “

NET #1” on the WANsuite 5160 or “NET” on the WANsuite

5130 as shown in Figure 5.15.

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 262 263

Comentarios a estos manuales

Sin comentarios

Verilink WANsuite 5130 (34-00298.L) Product Manual Manual de usuario Pagina 231

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink WANsuite 5130 (34-00298.L) Product Manual