Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario descargar pdf (Pagina 39)

Web Server Interface 3-7

Coding

Sets the Network side line coding.

Values: AMI, B8ZS

Default: B8ZS

Timing

Sets the timing source to synchronize the unit’s internal timing generators. In

all cases, slips are controlled to occur on frame boundaries at the Network

ports when timing synchronization is lost. The options are as follows:

Network 1

“Function” parameter (on the Network 2 screen) in “Slaved” Mode − Internal,

Network 1, Network 2, Network 3, Serial 1, Serial 2

“Function” parameter (on the Network 2 screen) in “Network” Mode −

Internal, Network 1, Network 3, Serial 1

“Function” parameter (on the Network 2 screen) in “APS Backup” Mode −

Internal, Network 1, Network 3, Serial 1, Serial 2

Network 2

“Function” parameter in “Slaved” or “APS Backup” Mode − timing parameter

is ignored

“Function” parameter in “Network” Mode − Internal, Network 2, Serial 2

Definitions of the timing sources are as follows:

Internal – The unit’s internal frequency standard (T1 1.544 Mbps ± 50 bps)

is used for all timing.

Network 1, Network 2, Network 3 – Timing is derived from the Network

port recovered clock.

Serial 1, Serial 2 – Timing is derived from the Serial port recovered clock.

Zero Suppression

Determines whether ones density insertion is activated after 15 zeros. This

parameter is ignored if the Coding parameter is set to “B8ZS.”

Values: Disable, Enable

Default: Disable

PRM Enable

Lets you establish which performance messaging standard will be employed

to initiate Performance Report Message (PRM) functions. Setting this field to

“Enable” instructs the unit to use ANSI T1.403, which sends a PRM once

every second. Setting this field to “Disable” instructs the unit to use AT&T

TR54016, which provides performance reporting on request only.

Values: Disable, Enable

Default: Disable

Learn DS0s on Boot

Determines if the unit will attempt to discover active DS0s after power-up or

Save and Restart. Active DS0s will then be assigned to the first associated

network service.

Values: Disable, Enable

Default: Disable

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 254 255

Comentarios a estos manuales

Sin comentarios

Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink WANsuite 7105 (34-00316.C) Product Manual