Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario Pagina 198

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 255
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 197
4-64 WANsuite 7105
backbone, virtual links can be configured through non-backbone areas.
Basically, virtual links are used to connect components that are otherwise not
connected to the backbone.
A virtual link is treated by OSPF as a point-to-point unnumbered network
joining two area border routers. The virtual link must be configured in both of
the area border routers.
A virtual link is defined by the following two parameters:
The Router ID of the virtual link’s other endpoint
The non-backbone area across which the virtual link goes through.
Figure 4.56
Virtual Link Table Screen
The fields displayed on the Virtual Link Table screen are described below.
Virtual Link Details Screen
This screen displays the details associated with the specific Virtual Link.
Field Description
Enable Enables the definition of a virtual link.
Transit Area ID The non-backbone area that the virtual link goes through.
Area Border
Router ID
The Router ID of the virtual link’s other endpoint.
Vista de pagina 197
1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 254 255

Comentarios a estos manuales

Sin comentarios