Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario Pagina 186

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 255
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 185
4-52 WANsuite 7105
Trap Log Screen
The table shown in this screen lists each trap by its Index number, and
displays the type of error captured by the trap (Trap Number) and the date
and time that the trap was stored (Time Stamp).
Figure 4.43
Trap Log Screen
IP Gateway
The IP Gateway is a feature of the WANsuite 7105 that allows routing of IP
packets from one network to another using static routes configuration and/or
dynamic routing.
IP Gateway Screen
The IP Gateway uses Routing Information Protocol (RIP) 1 or RIP 2 or Open
Shortest Path First (OSPF) routing.
RIP 1 and RIP 2 are protocols that allow exchange of routing information
between two routers. With that information exchange, a router can build its
own routing tables that later can be used for “routing” IP packets.
OSPF is a shortest path first (SPF) or link-state protocol. OSPF is an internal
gateway protocol (IGP) that distributes routing information between routers in
a single autonomous system (AS). OSPF chooses the least cost path as the
best path.
While RIP is ideal for small- to medium-sized networks, OSPF is more
suitable for complex networks with a large number of routers. OSPF provides
equal cost multipath routing where packets to a single destination can be sent
via more than one interface simultaneously.
Vista de pagina 185
1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 254 255

Comentarios a estos manuales

Sin comentarios