Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario descargar pdf (Pagina 157)

VT100 Interface 4-23

4-23) by selecting from an entry under the “Index” column (Service Details),

the <Interface> column (Interface Details), or <Type> column (Type Details).

To add a service, select the “Add Service prompt at the top of the screen.

Data Line Monitor Table

Select the Data Line Monitor prompt at the top of the Service Table screen to

view a screen that displays SCADA port information (Figure 4.17).

Figure 4.17

Data Line Monitor Table

Service Enable and

Disable

Displays whether capture is Enabled or Disabled.

Tx/Rx Filter

Displays the direction of the captured data.

Pattern Filter Enable

Displays the Filter for the pattern being searched and captured.

Pattern

Displays which specific pattern is being searched for.

Mask

Displays the bits the unit is looking for.

Offset

Displays the offset in the packet that matches the pattern.

You may view the captured data in the Data Monitor Packet Table screen

(Figure 4.18) by selecting the “Packet Capture” prompt at the top of the Data

Line Monitor screen. The screen shows about 10 lines of active data, and if a

line is selected, the screen will display further decoded data below.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 254 255

Sin comentarios

Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario Pagina 157