Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario Pagina 185

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 255
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 184
VT100 Interface 4-51
SNMP
The unit detects and reports T1 alarms and provides several options for
reporting them, one of which is SNMP traps. When a network alarm occurs,
the unit sends a trap message to as many as eight destinations on your
network. The unit will report each alarm by transmitting an SNMP “trap” to
each non-zero Trap IP address.
SNMP Details Screen
The SNMP Details screen (Figure 4.42) lets you configure the SNMP
parameters described in the paragraphs below.
Figure 4.42
SNMP Details Screen
Read Community
Accepts a character string identifying the group authorized to perform read
operations. The default setting is “Public.”
Write Community
Accepts a character string identifying the group authorized to perform write
operations. The default setting is “Private.”
Trap Community
Accepts a character string, which is included in SNMP traps generated by the
unit. The default setting is “Public.”
Trap IP Address
Accepts the IP address of a network device where alarm reporting traps are to
be sent.
Trap Log
A trap is a mechanism that permits a device to send an alarm for certain
network events to an SNMP management station. The Trap Log screen
(Figure 4.43) shows a collection of all the traps that have been generated.
Vista de pagina 184
1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 254 255

Comentarios a estos manuales

Sin comentarios