Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario descargar pdf (Pagina 245)

SNMP Agent B-1

A PPENDIX

PPENDIX

SNMP A

GENT

Introduction

This chapter provides specific information for configuring and using the

SNMP agent within the WANsuite 7105.

The WANsuite 7105 incorporates an Ethernet port that provides connectivity

for LAN-based management stations. The embedded TCP/IP Protocol Stack

allows remote access from both private networks and the Internet.

SNMP Configuration Parameters

To access the SNMP agent, you must have an SNMP management

application, such as Verilink’s NetVoyant, HP’s OpenView

, or Sun’s

NetManager

. Access to the agent is controlled by three community strings,

read-access, write-access, and trap-access (the community string sent with an

SNMP trap). Configuration of these community strings within the WANsuite

7105 is accomplished via the HTTP (web browser) interface (refer to Chapter

3, Web Server Interface) or the VT100 interface (refer to Chapter 4, VT100

Interface).

The defaults for these strings are “public” for read-access, “private” for write-

access, and “public” for trap-access. Ensure that your SNMP management

application is configured for whatever access strings you use.

SNMP MIBs

The WANsuite 7105 supports the following industry-standard MIB

(management information base) files:

• rfc1907.mib − SNMPv2 entities (initial revision published as RFC 1450)

• rfc1573.mib − defines the IANAifType textual convention, and thus the

enumerated values of the ifType object defined in MIB-II’s

ifTable

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 254 255

Sin comentarios

Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario Pagina 245