Verilink 9000 Series (34-00271) Product Manual Manual de usuario Pagina 350

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 440
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 349
328 CHAPTER 19: IPX ROUTER
IPX Static Service
Table Parameters
To add or modify an IPX static service from the main IPX Static Service menu,
press F3 or F2 and Figure 19-4 appears. To list all configured IPX static services,
press F4.
Defaults are shown underlined.
Line Module
This field indicates the line module number of the port currently displayed.
Entering a different line module number and pressing F10 transfers the screen to
the same port on the new line module
Static Service Number
The Static Service number must be unique and ranges from 1 to 255. This field
should not be modified.
Enable This Static Service
This field enables the Static Service. The default value is Y
.
Associated Circuit Number
This field shows which circuit is associated to this Static Route. The Associated
Circuit Number must be set to a Configured Circuit in the IPX CIRCUIT
Parameters screen on page 321. It ranges from 1
to 255.
TXPORT INTELLINET Configuration Program
Configuration
Add IPX Static Service
Line Module
Static Service number [001] Enable this Static Service [Y]
Associated Circuit Number [001]
IPX Service Type [ 0]
IPX Server Name [ ]
IPX Network Address of Service [ 0]
IPX Node Address of Next Hop [000000000000]
IPX Socket Address of Service [ ]
IPX Hops To Service [ 0]
Figure 19-7
IPX Static Service Table Parameters Screen
Vista de pagina 349
1 2 ... 345 346 347 348 349 350 351 352 353 354 355 ... 439 440

Comentarios a estos manuales

Sin comentarios