Verilink 9000 Series (34-00271) Product Manual Manual de usuario descargar pdf (Pagina 113)

100

101

Configuration / Operation

Select Retry Delay

If a device is selected 50 consecutive times and NAKs the select each time, the

unit places the device in a slow select state. The value in this field determines the

number of seconds between each select. The selections are 1 to 255, 10

Poll And Select Timeout

This is the amount of time, in milliseconds, the controller waits for a response to

either a Poll or a Select.

The values for this parameter are in 10-millisecond increments. A value that is not

a factor of 10 rounds down to the nearest 10-millisecond factor.

Example: A value of 305 rounds down to 300 milliseconds.

The selections are 0 to 655350, 300

Downline Controller

The setting of this parameter specifies the way the TXPORT unit determines how a

station is online. When set to Y (yes), the unit selects each station to determine its

status. If a NAK is received, the unit marks the station as offline. If an ACK is

received, the station is marked as online. The selections are Y (yes) and N (no)

Activity Timer

Activity timer is the amount of time, in minutes, that no data can be present on the

port before the unit disconnects the line. This is used primarily in dial-up

applications. Line disconnection is done by lowering the DTR signal for 500

milliseconds and then raising it again. Entering 0 disables this feature. The

selections are 0

to 255.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 439 440

Comentarios a estos manuales

Sin comentarios

Verilink 9000 Series (34-00271) Product Manual Manual de usuario Pagina 113

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink 9000 Series (34-00271) Product Manual