Verilink T1 Access Router (34-00327) Product Manual Manual de usuario descargar pdf (Pagina 148)

4-40 T1 Access Router

Figure 4.33

Traffic Meter Statistics Screen

The Traffic Meter Statistics screen reports on the following parameters:

• Tx Frames

• Tx Octets

• Rx Frames

• Rx Octets

• Rate Peak – the peak data rate for the viewed period (see below)

• Rate Average – the average data rate for the viewed period (see below)

The <Period> field defines the interval for which the Traffic Meter statistics

are reported as listed below.

Summary

Represents the past 24 hours; reports the additive number of frames/octets, the

highest peak encountered for 24 hours, and the average for 24 hours.

Current

Reports on the current 15-minute interval.

Interval 1,

Interval 2,...,

Interval 96

Reports on Intervals 1-96, which correspond to the periods completed 15

minutes ago, 30 minutes ago,..., 24 hours ago.

SNMP

The unit detects and reports T1 network alarms and provides several options

for reporting them, one of which is SNMP traps. When a network alarm

occurs, the unit sends a trap message to as many as eight destinations on your

network. The unit will report each alarm by transmitting an SNMP “trap” to

each non-zero Trap IP address.

The SNMP Details screen (Figure 4.34) lets you configure the SNMP

parameters described in the paragraphs below.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 196 197

Sin comentarios

Verilink T1 Access Router (34-00327) Product Manual Manual de usuario Pagina 148