Verilink T1 Access Router (34-00327) Product Manual Manual de usuario Pagina 113

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 197
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 112
VT100 Interface 4-5
NOTICE: Remember that passwords are case-sensitive and are limited to no more
than 10 characters. When logging on, password must be entered exactly
as it was programmed.
The System screen displays the user-selectable prompts listed in the table
below.
Maintenance Reset
Select this prompt to access a screen (Figure 4.4) where you can reset your
unit to factory defaults.
Figure 4.4
Maintenance Reset Screen
Using the space bar, you may toggle through the options to select the desired
maintenance reset (Default TDM Configuration, Default Packet Configuration,
Default Packet 3 Configuration, or Default Packet 4 Configuration). After you
select an option, the unit will display a confirmation screen (Figure 4.5) where
you may choose either to proceed with the maintenance reset or not.
Prompt Function
Maintenance Reset Brings up a screen where you can reset unit to its default
TDM or Packet, Packet 3, or Packet 4 configuration.
Save and Restart Saves the current configuration and restarts the unit.
Vista de pagina 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 196 197

Comentarios a estos manuales

Sin comentarios