Verilink HDM 2180 (880-503048-001) Product Manual Manual de usuario descargar pdf (Pagina 20)

HDM 2180 Quick Set-Up

2-2 Verilink HDM 2180 User Manual

NOTE: The node controller module (NCM 2000) is usually installed in

slot 1 of shelf 1. However, for use with an HDM in a dual-line

shelf, the NCM must be installed in slot 2.

Connect to Craft

Port

Connect the modular (RJ-11) end of the Craft cable (P/N 458-

501788-008) to the port labeled

OCAL

on the front panel of the NCM

module.

Connect the other end of the Craft cable to your PC or terminal. If

your PC has a DB-9 COM port connector, use a standard PC-AT

serial cable to complete the connection.

Terminal

Parameters

Set your terminal, or terminal program, to

• 19.2 kbit/s

• 8 data bits

• no parity

• one stop bit

• no flow control

NOTE: For the most effective and efficient set-up, have all required

planning data such as your intended use, network (telco)

provider specifications, channel and line requirements,

circuit configurations, and other important information

handy. For your convenience, worksheets are provided in the

manual, AS2000: The Basics, Chapter 2—”Site Planning”.

Logging On

1. Press

NTER

to display the pSH+>

pSH+>pSH+>

pSH+> prompt and type “craft”.

2. Press

NTER

to display the NCM Main Menu.

The default password for the NCM gives the user Access Level 2

permissions. For a higher access level, see your NCM 2000 User

Manual.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 78 79

Sin comentarios

Verilink HDM 2180 (880-503048-001) Product Manual Manual de usuario Pagina 20