Verilink HDM 2180 (880-503048-001) Product Manual Manual de usuario descargar pdf (Pagina 19)

Verilink HDM 2180 User Manual 2-1

Chapter

HDM 2180 Quick Set-Up

This chapter provides step-by-step procedures for setting up your

HDM 2180 module. This quick configuration guide makes the

following assumptions:

• You are installing the HDM 2180 and an NCM 2000 module in a

Dual-line Shelf. Two external PWR 2940 power supplies will be

used.

• You are putting a router on the HSSI port of the HDM 2180 that

outputs data at 43 Mbit/s.

• You are connecting a full T3 to the DS3 port.

NOTE: The NCM 2000 controller module MUST be installed in Slot 2

of the shelf. The HDM 2180 MUST be installed in Slot 1 of the

shelf. When an HDM 2180 and an NCM 2000 are used in a

Dual-line shelf, two external power supplies are required.

Figure 2-1 Example Configuration

NOTE: These procedures may not match your configuration. Use this

chapter as a guide for equipment installation. Chapter 3 has

complete details on configuration covering all options.

Installation

Do the following before installing the HDM 2180:

• Install all associated Access System 2000 shelves and power

supplies, as outlined in the AS2000: The Basics manual.

• Install and test the NCM module first.

Management

Terminal/PC

Full T3

NCM 2000

HDM 2180

DS3 Port

Router

HSSI Port to

43 Mbit/s

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 78 79

Sin comentarios

Verilink HDM 2180 (880-503048-001) Product Manual Manual de usuario Pagina 19