Verilink WANsuite 5230 (34-00304.F) Product Manual Manual de usuario Pagina 96

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 233
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 95
3-66 WANsuite 5260/5230
Area Details Screen
Access this screen by clicking on the Area Details button on the Area Table
screen.
Figure 3.54
Area Details Screen
Area ID
This parameter has the same format as the IP Address of the Mask Address.
Values: 0.0.0.0255.255.255.255
Default: 0.0.0.0
Enable
Displays whether or not this Area is enabled.
Values: Enable, Disable
Default: Enable
Auth Type
Indicates type of Authentication.
Values: Simple, None
Default: None
Stub
An area can be configured as stub when there is a single exit point from the
area, or when the choice of exit point need not be made on a per-external-
destination basis.
Values: Yes, No
Default: No
Address Summary
A configured address range specifies what addresses are contained within an
area. When summarizing the routes in an area to inform other areas, all routes
Add New
Defines a new Area.
Refresh Refreshes data on the current page.
Button Function
Vista de pagina 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 232 233

Comentarios a estos manuales

Sin comentarios