Verilink QUAD T1 (880-503345-001) Product Manual Manual de usuario descargar pdf (Pagina 20)

Quick Set-Up

2-6 Verilink QUAD T1 User Manual

Figure 2-5 Configuration Menu for Slot 4

10. Use "I1" to place port 1 into service. No other changes to the

module default settings are required for this example.

11. Use the "C" command and copy the settings for port 1 to all

ports.

12. Use the "T" command to access the timing submenu and verify

that the

R) receive clock from shelf:

R) receive clock from shelf:R) receive clock from shelf:

R) receive clock from shelf:

option is set to

yes

yesyes

yes

.

13. This completes the port configuration for this module. Exit to

the

Main Menu

by typing "X" twice.

Build Circuits

Once the required ports are configured and placed in service, the

circuits are built using the Circuit Build function of the SCM.

Always use the Craft interface of the SCM module, by direct

connection or Telnet, to access the Circuit Build function—instead

of connecting to the Craft interface of the individual modules. This

assures that the SCM remains the central repository of all circuit

routing information.

NOTE:

The assumption is made that the ports of the other modules

have been placed in service and configured. Always place

ports in service and configure them before building circuits.

-- QUAD T1 CONFIGURATION MENU --

-- QUAD T1 CONFIGURATION MENU ---- QUAD T1 CONFIGURATION MENU --

-- QUAD T1 CONFIGURATION MENU --

Port 1 Port 2 Port 3 Port 4

Port 1 Port 2 Port 3 Port 4 Port 1 Port 2 Port 3 Port 4

Port 1 Port 2 Port 3 Port 4

In) in service no no no no

In) in service no no no noIn) in service no no no no

In) in service no no no no

Fn) frame format ESF ESF ESF ESF

Fn) frame format ESF ESF ESF ESFFn) frame format ESF ESF ESF ESF

Fn) frame format ESF ESF ESF ESF

Ln) line coding B8ZS B8ZS B8ZS B8ZS

Ln) line coding B8ZS B8ZS B8ZS B8ZSLn) line coding B8ZS B8ZS B8ZS B8ZS

Ln) line coding B8ZS B8ZS B8ZS B8ZS

Bn) line build out 0db 0db 0db 0db

Bn) line build out 0db 0db 0db 0dbBn) line build out 0db 0db 0db 0db

Bn) line build out 0db 0db 0db 0db

En) equalization n/a n/a n/a n/a

En) equalization n/a n/a n/a n/aEn) equalization n/a n/a n/a n/a

En) equalization n/a n/a n/a n/a

NDn) network density none none none none

NDn) network density none none none noneNDn) network density none none none none

NDn) network density none none none none

NLn) network initiated loop no no no no

NLn) network initiated loop no no no noNLn) network initiated loop no no no no

NLn) network initiated loop no no no no

An) alarm declare time(sec) 0 0 0 0

An) alarm declare time(sec) 0 0 0 0An) alarm declare time(sec) 0 0 0 0

An) alarm declare time(sec) 0 0 0 0

DLn) FDL enable no no no no

DLn) FDL enable no no no noDLn) FDL enable no no no no

DLn) FDL enable no no no no

PRM enable yes yes yes yes

PRM enable yes yes yes yes PRM enable yes yes yes yes

PRM enable yes yes yes yes

Rn) enable inband/FDL no no no no

Rn) enable inband/FDL no no no noRn) enable inband/FDL no no no no

Rn) enable inband/FDL no no no no

Sn) trunk condition bits(A/B) 0/0 0/0 0/0 0/0

Sn) trunk condition bits(A/B) 0/0 0/0 0/0 0/0Sn) trunk condition bits(A/B) 0/0 0/0 0/0 0/0

Sn) trunk condition bits(A/B) 0/0 0/0 0/0 0/0

F) FDL configuration

F) FDL configurationF) FDL configuration

F) FDL configuration

C) copy port T) timing

C) copy port T) timingC) copy port T) timing

C) copy port T) timing

X) exit this menu

X) exit this menuX) exit this menu

X) exit this menu

A [0.0.0.2] [1,4] QUAD T1 >

A [0.0.0.2] [1,4] QUAD T1 >A [0.0.0.2] [1,4] QUAD T1 >

A [0.0.0.2] [1,4] QUAD T1 >

Verilink QUAD T1 (880-503345-001) Product Manual Manual de usuario Pagina 20

Comentarios a estos manuales

Verilink QUAD T1 (880-503345-001) Product Manual Manual de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink QUAD T1 (880-503345-001) Product Manual