Verilink Net Engine (3150-30626-001) Product Manual Manual de usuario descargar pdf (Pagina 26)

NetEngine IAD User Guide

Introduction 7

AC Power

Connects the IAD to an AC outlet of 108-130 volts via an AC power cord.

10/100Base-T Ethernet Port

Connects the IAD to the local area network using a CAT-5 straight through

Ethernet cable, or directly to a PC for accessing via Telnet (using a cross-

over cable, customer-supplied).

WAN Interfaces

Depending on the IAD, WAN interfaces include the following:

T1/E1—uses an RJ48 connector for the connection.

SDSL—uses an RJ45 connector for the connection.

Universal Serial Interface (USI) Port

The USI port is configurable for RS-530 or V.35. When configured as an

RS-530 port, you may use a straight through DB25 serial cable for

connection to your leased line DSU/CSU equipment. When configured for

use as V.35, Black Box Corporation provides a cable (FA058) for

conversion purposes. To convert from RS-530 to RS-449, Black Box

provides a cable EDN57J. By notifying you of their availability, Verilink

neither endorses or recommends these products.

For USI port pinouts when configured as RS-530, V.35 or RS-449, see

Table D–9 on page 291.

RS-232 Console Port

Connects the IAD to a PC, using a straight through 9-pin serial (DB9 RS-

232) cable for the purpose of using a terminal emulator for configuration

and management.

Telephone Interfaces

Each 7000 family IAD supports 16 analog telephones via an RJ-11 jack.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 322 323

Sin comentarios

Verilink Net Engine (3150-30626-001) Product Manual Manual de usuario Pagina 26