Verilink Net Engine (3150-30626-001) Product Manual Manual de usuario Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 323
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
NetEngine IAD User Guide
WAN Configuration 86
Figure 4–45. IPCP Configuration Menu
Type the option corresponding to the IP address you want to use.
5. The IAD displays the status of the DNS server assignment for the
selected port, and prompts you to enable or disable it:
RFC 1877 DNS Server Assignment for T1/E1, Port 1 is
currently ENABLED
Enter E to Enable, D to Disable:
Type E to enable, or D to disable the DNS server assignment for T1 on
this port.
6. The IAD reports the change, displays the status of the DNS server
assignment for the port, and prompts you to enable or disable it:
RFC 1877 Client configuration unchanged.
Cisco 6400 IP Mask Assignment for T1/E1, Port 1 is
currently ENABLED
Enter E to Enable, D to Disable:
Type E to enable, or D to disable the IP mask assignment for T1 on this
port.
7. The IAD transfers the IP address and mask assigned to a WAN port to
a LAN port.
8. The IAD displays the ATM Service Category Configuration menu:
Figure 4–46. ATM Encapsulation Configuration Menu
Type 1 to select CBR for high priority data
—or
Type 2 to select UBR for low priority data.
9. The IAD displays the Peak Cell Rate Configuration menu:
*******************************************
IPCP IP Address Type Menu
******************************************
1. Static IP Address
2. IPCP Address Assignment
3. WAN Unnumbered IP
*****************************************
ATM Service Category Configuration
*****************************************
Current Encapsulation: NONE
1. CBR
2. UBR
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 322 323

Comentarios a estos manuales

Sin comentarios