Verilink WANsuite 7205 (34-00317.B) Product Manual Manual de usuario Pagina 192

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 221
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 191
4-70 WANsuite 7205
Figure 4.63
Static TCP Trans Details Screen
NAT Ports Screen
The parameters on the NAT Ports screen (Figure 4.64) define the NAT
global/Internet and local/Corporate ports. These parameters are configured in
the NAT Ports Details screen shown in Figure 4.65. Access the NAT Ports
Details screen by selecting the <Ndx> number of the desired port on the NAT
Ports screen.
Figure 4.64
NAT Ports Screen
Enable
Enables or disables the NAT port. Default is “Enable.”
Default Translation
Forces translation on a specific IP port regardless of the source IP Address. If
Default Translation is set to “Enable,” the packet will never be discarded, but
will always pass through the translation path. Therefore, any packets with a
destination address different from the global/Internet network address will be
processed by the IP Gateway, and may be routed to another port. If this
parameter is set to “Disable,” no packet with a destination address different
from the global/Internet address will be processed. Setting this parameter to
Vista de pagina 191
1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 220 221

Comentarios a estos manuales

Sin comentarios