Verilink WANsuite 7205 (34-00317.B) Product Manual Manual de usuario Pagina 131
- Pagina / 221
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
VT100 Interface 4-9
SES
Sets the Severely Errored Seconds (SES) threshold. An SES is a 1-second
period in which at least 320 Cyclic Redundancy Check (CRC) errors or one
Out-of-Frame (OOF) error occurred. The default value is 5 seconds.
LOSS
Sets the Loss of Signal Seconds (LOSS) threshold. A LOSS is 1-second
period in which the E1 received signal is interrupted. The default value is
5 seconds.
UAS
Sets the Unavailable Seconds (UAS) threshold. A UAS is a 1-second period
in which consecutive severely errored seconds cause an unavailable state. The
default is 0 seconds (Disabled).
CSS
Sets the Controlled Slip Seconds (CSS) threshold. The default is 0 (zero)
seconds (Disabled).
BPVS
Sets the Bipolar Violation Errored Seconds (BPVS) threshold. A BPVS is a 1-
second period in which at least one bipolar violation occurred. The default is
0 (zero) seconds (Disabled).
OOFS
Sets the Out of Frame Seconds (OOFS) threshold. An OOFS is a 1-second
period in which a frame sync loss occurred. The default value is 5 seconds.
AISS
Sets the Alarm Indication Signal Seconds (AISS) threshold. An AISS is a 1-
second period when unframed all ones are received. The default is 0 (zero)
seconds (Disabled).
RAS
Sets the Remote Alarm Seconds (RAS) threshold. An RAS is generated by
the terminal equipment when an improper signal is received from the facility
(or upon receipt of unframed all ones). The default is 0 seconds (Disabled).
Reset Timer
Sets the Reset Timer threshold. This field is the contiguous number of
seconds that an alarm parameter must be clear before the alarm is reset.
Applicable values range from 000 through 900. A value of “000” means the
alarm will never be reset.
The Network Config screens provide the user-selectable prompts described in
the table below.
Prompt Function
Clear Alarms Resets the alarm conditions and counts to zero.
Performance Displays a current count of the number of error events that have
occurred over the past 24 hours and the past 30 days.
Channels Displays the Channel Table Details screen (see page 4-20),
showing each channel by index number. Each channel’s rate and
service (by number) are displayed and can be changed through
user input, as can the Idle Pattern. Pair information is also
displayed on this screen.
- WANsuite 1
- Reference Manual 1
- Table of Contents 5
- Chapter 2 Installation 6
- Chapter 4 VT100 Interface 7
- Appendix A Specifications 8
- Appendix B SNMP Agent 9
- Manual Organization 11
- Related Verilink Documents 12
- Telephone 13
- Internet 13
- ABOUT THE WANSUITE 7205 15
- 1-2 WANsuite 7205 16
- Features of the WANsuite 7205 17
- Percent Utilization Reports 18
- Test Access Jacks 18
- SNMP Management 18
- Embedded Web Server 18
- About FrameStart Technology 19
- Features Summary 20
- About the WANsuite 7205 1-7 21
- Front Panel 22
- Local Supervisory Port 23
- Ethernet LED Indicators 24
- Power Connection 25
- Power Options 26
- Power Failure 26
- NSTALLATION 27
- Supplied Materials 28
- Installation 2-3 29
- 2-4 WANsuite 7205 30
- Unit Screen 32
- Web Server Interface 3-3 33
- Interfaces 34
- Network 2 Screen 35
- 3-6 WANsuite 7205 36
- Web Server Interface 3-7 37
- Figure 3.5 38
- Serial Screen 40
- Web Server Interface 3-11 41
- 3-12 WANsuite 7205 42
- Web Server Interface 3-13 43
- Figure 3.9 44
- Supervisory Screen 45
- Services Screen 46
- Adding a Service 47
- Interface Details Button 48
- Type Details Button 49
- Delete Service Button 49
- Figure 3.16 51
- Figure 3.17 52
- Figure 3.18 52
- Figure 3.19 53
- 3-24 WANsuite 7205 54
- Web Server Interface 3-25 55
- Status and Alarms Table 56
- Figure 3.20 57
- SCADA Details Screen 58
- Figure 3.22 59
- Parameters To Negotiate 61
- Transmit 63
- Throughput (bits/sec) 63
- Web Server Interface 3-39 69
- Endpoint Service Details 70
- Web Server Interface 3-41 71
- DLCI Status Table 72
- Figure 3.37 77
- NOTICE: The 2 81
- IP Gateway Screen 85
- Circuits Screen 87
- Static Routes Screen 90
- Route Details Screen 90
- Figure 3.48 91
- Dynamic Route Table Screen 92
- Virtual Link Details Screen 98
- TCP Server Screen 99
- NAT Details Screen 100
- Web Server Interface 3-71 101
- Figure 3.61 102
- Button Function 103
- NAT Ports Screen 104
- Figure 3.66 105
- Figure 3.67 106
- DHCP Server Details Screen 107
- DHCP Hosts Screen 108
- Static Entries Screen 109
- IP Address List Screen 109
- IP Address Status Screen 110
- HDLC Monitor Details Screen 111
- HDLC Status and Alarm Table 113
- Figure 3.76 114
- Bridge Details Screen 115
- Figure 3.78 116
- Figure 3.79 116
- Bridge Lookup Table 117
- Utilities 118
- Save/Upload 119
- Password 120
- In-band Management 121
- 3-92 WANsuite 7205 122
- NTERFACE 123
- Cursor Controls 124
- Field Types 124
- Menu Structure 125
- System Screen 126
- New Password 127
- Maintenance Reset 127
- Save and Restart 127
- Interfaces Screen 128
- Network 2 Config Screen 129
- 4-8 WANsuite 7205 130
- Prompt Function 131
- Performance Screens 132
- Serial Screens 133
- 4-12 WANsuite 7205 134
- VT100 Interface 4-13 135
- 4-14 WANsuite 7205 136
- Ethernet (IP Details) Screen 137
- Supervisory Config Screen 138
- Service Table Screen 139
- Service Details Screen 140
- DS0 Monitor Details Screen 141
- DS0 Status and Alarm Table 142
- Figure 4.17 143
- Figure 4.18 143
- Field Description 144
- VT100 Interface 4-23 145
- 4-24 WANsuite 7205 146
- Frame Relay Statistics Screen 148
- SCADA Service Details Screen 149
- SCADA Device List Screen 150
- PPP Service Details Screen 151
- 4-30 WANsuite 7205 152
- Parameters to Negotiate 153
- PPP Statistics 153
- PAP Table 154
- CHAP Table 155
- Applications 156
- Endpoint Details Screen 157
- VT100 Interface 4-37 159
- DLCI Details Screen 160
- VT100 Interface 4-39 161
- 4-40 WANsuite 7205 162
- DLCI Statistics Screen 163
- DLCI Table Screen 164
- Rule Config Screen 165
- Figure 4.38 167
- SNMP Details Screen 168
- Diagnostics Screen 168
- Test Details Screens 169
- Figure 4.41 170
- Figure 4.42 171
- 4-50 WANsuite 7205 172
- Trap Log Screen 173
- Top Talkers Screen 173
- RIP Parameters 175
- OSPF Parameters 176
- Circuit Table Screen 176
- Circuit Details Screen 177
- 4-56 WANsuite 7205 178
- Static Route Table Screen 179
- Routes Details Screen 180
- Static ARP Table Screen 181
- ARP Details Screen 182
- Trusted Neighbors Screen 183
- Area Table Screen 183
- Area Details Screen 184
- Virtual Link Table Screen 185
- Area Border 186
- Router ID 186
- TCP Server Details Screen 187
- TCP Connection Table Screen 188
- TCP Connection Details Screen 188
- Static TCP Trans Table Screen 191
- NAT Port Details Screen 193
- NAT Port Status Screen 194
- Figure 4.68 195
- IP Address List 198
- HDLC Monitor Table Screen 199
- Figure 4.77 203
- Bridge Port Table 205
- Bridge Port Details 205
- 4-84 WANsuite 7205 206
- PECIFICATIONS 207
- Management Interfaces 208
- Diagnostics 208
- Loopback Diagrams 209
- Mechanical 210
- Environmental 210
- Per Port 211
- Per DLCI 211
- Industry Listings 212
- Standards 212
- Ordering Information 212
- Optional Equipment 213
- Connector Pin Assignments 214
- Function Abbrev. Direction 215
- DB-25* RS-232 V.35 EIA-530 215
- Pin Ethernet Interface 215
- Pin E1 NET Interface 216
- Pin DCE Port 216
- Introduction 217
- SNMP Configuration Parameters 217
- SNMP MIBs 217
- SNMP Trap Configuration 218
- SNMP Agent B-3 219
- B-4 WANsuite 7205 220
Relacionado con productos y manuales para Hardware De La Computadora Verilink WANsuite 7205 (34-00317.B) Product Manual
Hardware De La Computadora Verilink 1200 Rack Pwr Spply (IG) Configuration/Installatio Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1251 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1250 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1544 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1544E (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1544N (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1555 (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1557 (CG) Configuration/Installation Guide Manual de usuario
(4 paginas)
(4 paginas)
Hardware De La Computadora Verilink WANsuite 7105 (34-00316.C) Product Manual Manual de usuario
(255 paginas)
(255 paginas)
Hardware De La Computadora Verilink 1558A (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 1559 (CG) Configuration/Installation Guide Manual de usuario
(4 paginas)
(4 paginas)
Hardware De La Computadora Verilink 1558D (CG) Configuration/Installation Guide Manual de usuario
(4 paginas)
(4 paginas)
Hardware De La Computadora Verilink 200 (CG) Configuration/Installation Guide Manual de usuario
(4 paginas)
(4 paginas)
Hardware De La Computadora Verilink 2000 (Standalone) Adden (CG) Configuration/Install Manual de usuario
(1 paginas)
(1 paginas)
Hardware De La Computadora Verilink 2000 ESF CSU Standalone (CG) Configuration/Install Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 2000 (1051-2 Chassis) (CG) Configuration/Installat Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 2010 Chassis (CG) Configuration/Installation Guide Manual de usuario
(2 paginas)
(2 paginas)
Hardware De La Computadora Verilink 2010 Standalone (CG) Configuration/Installation Gu Manual de usuario
(2 paginas)
(2 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.070 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales