Verilink WANsuite 7205 (34-00317.B) Product Manual Manual de usuario descargar pdf (Pagina 156)

4-34 WANsuite 7205

To change the Username and Secret for a selected CHAP Index, enter the new

information in the appropriate field(s) and press the “Esc” key.

IP Service Details Screen

The IP Service Details screen (Figure 4.11), accessed by selecting “IP” from the

<Type> column in the IP Service screen, lets you configure the IP parameters

described on page 4-15.

To change any of the available parameters, you must enter new values in the

appropriate field(s) and press the “Esc” key to save your changes.

NOTICE: To use newly established IP parameters, you must “Save and Restart.”

(See "Save and Restart" on page 4-5.)

Applications

Select “Applications” in the Main Menu screen to display the various

WANsuite 5160/5130 applications (Figure 4.29) associated with configuration

tables and statistics for Layer 3 and above that do not map to a specific

service or interface.

Figure 4.29

Applications Screen

Endpoint Table Screen

The Endpoint Table (Figure 4.30) describes all endpoints terminating in the

unit; user-selectable prompts are provided to view the Endpoint Details,

Endpoint Service Details, and Endpoint DLCI Details screens. The unit will

automatically learn all DLCIs from the Network side and relay that

information on the Serial side with default values.

The Endpoint Table and its corresponding DLCIs will be saved in the

configuration database either when you perform a “Save and Restart” or

automatically every 15 minutes.

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 220 221

Sin comentarios

Verilink WANsuite 7205 (34-00317.B) Product Manual Manual de usuario Pagina 156