Verilink WANsuite 6450 (34-00326) Product Manual Manual de usuario descargar pdf (Pagina 94)

3-66 WANsuite 6450

The Static UDP Translation Table screen provides the following user-

activated buttons:

You can configure or change the above-listed parameters on the NAT Static

UDP Translation Details screen (Figure 3.60), which is accessed by selecting

the appropriate number under the Index column on the Static UDP Translation

Table screen.

Figure 3.60

NAT Static UDP Translation Details Screen

NAT Port Table Screen

The parameters on the NAT Port Table screen (Figure 3.61) define the NAT

global/Internet and local/Corporate ports. These parameters are configured in

the NAT Ports Details screen shown in Figure 3.62. Access the NAT Port

Details screen by clicking on the Index number of the desired port on the

NAT Port Table screen.

Figure 3.61

NAT Port Table Screen

Endpoint

The Endpoint name of the circuit associated with the LAN or WAN port.

Default is LAN for the first port.

Enable

Enables or disables the NAT port. Default is “Enable.”

Default Translation

Forces translation on a specific IP port regardless of the source IP Address. If

Default Translation is set to “Enable,” the packet will never be discarded, but

will always pass through the translation path. Therefore, any packets with a

destination address different from the global/Internet network address will be

Button Function

NAT Details Returns the user to the previous screen.

Add New Lets the user add an additional address.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 204 205

Sin comentarios

Verilink WANsuite 6450 (34-00326) Product Manual Manual de usuario Pagina 94