Verilink WANsuite 6450 (34-00326) Product Manual Manual de usuario descargar pdf (Pagina 201)

SNMP Agent B-1

A PPENDIX

PPENDIX

SNMP A

GENT

Introduction

This chapter provides specific information for configuring and using the

SNMP agent within the WANsuite 6450.

The WANsuite 6450 incorporates an Ethernet card that provides connectivity

for LAN-based management stations. The embedded TCP/IP Protocol Stack

allows remote access from both private networks and the Internet.

SNMP Configuration Parameters

To access the SNMP agent, you must have an SNMP management

application, such as HP’s OpenView

or Sun’s NetManager . Access to the

agent is controlled by three community strings, read-access, write-access, and

trap-access (the community string sent with an SNMP trap). Configuration of

these community strings within the WANsuite 6450 is accomplished via the

HTTP (web browser) interface (Chapter 3, Web Server Interface).

The defaults for these strings are “public” for read-access, “private” for write-

access, and “public” for trap-access. Ensure that your SNMP management

application is configured for whatever access strings you use.

SNMP MIBs

The WANsuite 6450 supports the following industry-standard MIB

(management information base) files:

• rfc1573.mib − defines the IANAifType textual convention, and thus the

enumerated values of the ifType object defined in MIB-II’s

ifTable

• rfc1907.mib − SNMPv2 entities (initial revision published as RFC 1450)

• rfc2011.mib − for managing IP and ICMP implementations, but excluding

their management of IP routes

• rfc2012.mib − for managing TCP implementations

1 2 ... 196 197 198 199 200 201 202 203 204 205

Sin comentarios

Verilink WANsuite 6450 (34-00326) Product Manual Manual de usuario Pagina 201