Verilink WANsuite 6450 (34-00326) Product Manual Manual de usuario Pagina 180

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 205
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 179
4-72 WANsuite 6450
Figure 4.65
TFTP Configuration Screen
TFTP Server IP
Address
IP address of the server providing TFTP access.
File Name
Name of the file to be transferred.
Status
Indicates the current status of the TFTP operation. Possible values include
Idle, Getting File, Putting File, Aborting, Transfer Complete, Invalid File
Name, and Invalid File.
The following user-selectable prompts appear on the TFTP Configuration
screen.
NOTICE: Before performing the “Get” or “Put” operation, verify that the server
IP address and filename have the correct values.
SNMP
The unit detects and reports T1 or E1 network alarms and provides several
options for reporting them, one of which is SNMP traps. When a network
alarm occurs, the unit sends a trap message to as many as eight destinations
on your network. The unit will report each alarm by transmitting an SNMP
“trap” to each non-zero Trap IP Address. The SNMP Details screen (Figure
4.66) lets you configure the SNMP parameters described below.
Prompt Function
TFTP Get File Initiates a transfer from a server to the WANsuite unit.
TFTP Put File Initiates a transfer from the WANsuite unit to a server.
TFTP Abort Aborts the transfer.
Vista de pagina 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 204 205

Comentarios a estos manuales

Sin comentarios