Verilink WANsuite 5650 (34-00314.E) Product Manual Manual de usuario descargar pdf (Pagina 42)

3-20 WANsuite 5650

The table provides error status and alarm threshold information for the

following error parameters:

Sets the Errored Seconds (ES) threshold. An ES is a 1-second period in which

at least one logic error occurred. The default threshold is 45 seconds.

SES

Sets the Severely Errored Seconds (SES) threshold. An SES is a 1-second

period in which at least 320 CRC errors or one Out-of-Frame (OOF) error

occurred. The default threshold is 5 seconds.

LOSS

Sets the Loss of Signal Seconds (LOSS) threshold. A LOSS is 1-second

period in which the E1 received signal is interrupted. The default threshold is

5 seconds.

UAS

Sets the Unavailable Seconds (UAS) threshold. A UAS is a 1-second period

in which consecutive severely errored seconds cause an unavailable state. The

threshold is 0 (zero) seconds (Disabled).

CSS

Sets the Controlled Slip Seconds (CSS) threshold. The default threshold is 0

(zero) seconds (Disabled).

BPVS

Sets the Bipolar Violation Errored Seconds (BPVS) threshold. A BPVS is a 1-

second period in which at least one bipolar violation occurred. The default

threshold is 0 (zero) seconds (Disabled).

OOFS

Sets the Out of Frame Seconds (OOFS) threshold. An OOFS is a 1-second

period in which a frame sync loss occurred. The default threshold is 5

seconds.

AISS

Sets the Alarm Indication Signal Seconds (AISS) threshold. An AIS is a 1-

second period when unframed all ones are received. The default threshold is 0

(zero) seconds (Disabled).

RAS

Sets the Remote Alarm Seconds (RAS) threshold. An RAS is generated by

the terminal equipment when an improper signal is received from the facility

(or upon receipt of unframed all ones). The default threshold is 0 (zero)

seconds (Disabled).

Reset Timer

The status table also provides an option for setting the Reset Timer threshold.

This field is the contiguous number of seconds that an alarm parameter must

be clear before the alarm is reset. Applicable values range from 000 through

900. A value of “000” means the alarm will never be reset. The default value

is 30 seconds.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

Comentarios a estos manuales

Sin comentarios

Verilink WANsuite 5650 (34-00314.E) Product Manual Manual de usuario Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink WANsuite 5650 (34-00314.E) Product Manual

Prodotti e manuali riguardandi Switch di rete Black Box LB9017A-R2