Verilink WANsuite 5650 (34-00314.E) Product Manual Manual de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
1-2 WANsuite 5650
flexibility or utilization of the SHDSL pipe is achieved by allowing for the
assignment of the individual timeslots to the desired end-user port.
Simple Installation, Management and Troubleshooting
The WANsuite 5650 has been designed for simple installation, management
and troubleshooting. Power and communications interfaces are easily
accessed on the rear panel. The nine tri-color LEDs on the front panel
provide quick and easily recognizable status indications of unit operation.
The WANsuite 5650 supports the full set of standard EOC commands
allowing for remote management of the NTU from the DSLAM/switch. The
local supervisory port can also be utilized for management of the unit in
conjunction with a comprehensive set of VT100 screens. The four input
control buttons on the front panel of the WANsuite 5650 provide a simplified
means of troubleshooting by accessing unit diagnostic loops.
Features Summary
A powerful core architecture
Three data ports: SHDSL, G.703/704, and multi-protocol
N
x64k
SHDSL WAN interface
Multi-protocol
N
x64k serial port software-configurable for V.35, V.36 or
X.21
PowerPC™ platform with 8 Mbytes of RAM
G.703 port supports framed and unframed modes
HDB3 and AMI line coding
A suite of performance monitoring tools
Fully supports standard EOC commands
Local management port for on-site management, monitoring and
troubleshooting
Nine LED status indicators
Front panel control buttons to simplify troubleshooting
Programmable alarm thresholds
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Comentarios a estos manuales

Sin comentarios