Verilink WANsuite 5650 (34-00314.E) Product Manual Manual de usuario descargar pdf (Pagina 38)

3-16 WANsuite 5650

3.13), Span Endpoint Performance Screen(s) (Figure 3.14), and the Alarm

Profiles screen (Figure 3.9).

Span Endpoint Maintenance Screen

The Span Endpoint Maintenance screen (Figure 3.13) is accessed by moving the

cursor to the “Maintenance” field in the Span Endpoint Details screen and

pressing the “Enter” key. This screen supports maintenance operations (e.g.,

loopbacks) to be performed on segment endpoints.

Figure 3.13

Span Endpoint Maintenance Screen

The Span Endpoint Maintenance parameters are described as follows:

Loopback Type

This field controls configuration of loopbacks for the associated segment

endpoint.

Values:

No Loopback, Normal Loopback, Special Loopback

Default:

No Loopback

NOTICE:

Only the Normal Loopback option has been implemented for the

WANsuite 5650.

Loopback Timeout

This field configures the timeout value in minutes for loopbacks initiated at

segments endpoints contained in the associated unit. A value of 0 (zero)

disables the timeout.

Tip Ring

This field indicates the state of the tip/ring pair at the associated segment

endpoint.

Power Backoff

This field configures the receiver at the associated segment endpoint to

operate in default or enhanced power backoff mode.

Values:

Default, Enhanced

Default:

Default

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 67 68

Sin comentarios

Verilink WANsuite 5650 (34-00314.E) Product Manual Manual de usuario Pagina 38