Verilink WANsuite 5165 (34-00301.H) Product Manual Manual de usuario descargar pdf (Pagina 225)

SNMP Agent B-1

A PPENDIX

PPENDIX

SNMP A

GENT

Introduction

This chapter provides specific information for configuring and using the

SNMP agent within the WANsuite 5165.

The WANsuite 5165 incorporates an Ethernet port that provides connectivity

for LAN-based management stations. The embedded TCP/IP Protocol Stack

allows remote access from both private networks and the Internet.

SNMP Configuration Parameters

To access the SNMP agent, you must have an SNMP management

application, such as HP’s OpenView

or Sun’s NetManager . Access to the

agent is controlled by three community strings, read-access, write-access, and

trap-access (the community string sent with an SNMP trap). Configuration of

these community strings within the WANsuite 5165 is accomplished via the

HTTP (web browser) interface (refer to Chapter 3, Web Server Interface) or

the VT100 interface (refer to Chapter 4, VT100 Interface).

The defaults for these strings are “public” for read-access, “private” for write-

access, and “public” for trap-access. Ensure that your SNMP management

application is configured for whatever access strings you use.

SNMP MIBs

The WANsuite 5165 supports the following industry-standard MIB

(management information base) files:

• rfc1907.mib − SNMPv2 entities (initial revision published as RFC 1450)

• rfc1573.mib − defines the IANAifType textual convention, and thus the

enumerated values of the ifType object defined in MIB-II’s

ifTable

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 234 235

Sin comentarios

Verilink WANsuite 5165 (34-00301.H) Product Manual Manual de usuario Pagina 225