Verilink WANsuite 5165 (34-00301.H) Product Manual Manual de usuario Pagina 158

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 235
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 157
4-34 WANsuite 5165
ACCM
The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–FFFFFFFF (Hex)
Default: FFFFFFFF
MRU
The Maximum Receive Units (MRU) configuration option may be set to
inform the peer that the implementation can receive larger packets, or to
request that the peer send smaller packets.
Values: 128–4096
Default: 1500
Port IP Address
The IP Address of the port. For unnumbered PPP link, set to 0.0.0.0 and set
IP Address Negotiation to “No.
Default: 192.168.1.2
Peer IP Address
Enter the IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP Over
Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0
(zero) disables the periodic authentication challenge.
Values: 03600
Default: 0 (disabled)
Allow PAP
This parameter lets the peer negotiate for PAP.
Values: No, Yes
Default: No
Allow CHAP
This parameter lets the peer negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username
Type the appropriate PAP Username in this field to log on to the peer.
Values: User established
Default: Username
PAP Password
Enter the password necessary to log on to the peer under a given PAP
Username.
Values: User established
Default: None
CHAP Username
Type the appropriate CHAP Hostname in this field to challenge the peer.
Values: User established
Default: Hostname
Vista de pagina 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 234 235

Comentarios a estos manuales

Sin comentarios