Verilink DIU 2130 (880-503297-001) Product Manual Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 101
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
DIU 2130 Overview
1
-8 Verilink
Specifications
Electrical, environmental, and mechanical specifications of the DIU
2130 and associated DIMs are given below.
Table 1-2 DIU 2130 and DIM Specifications
Table 1-3 Data Interface Modules (DIMs)
:
Data Equipment
Interface
I/O Ports:
Two synchronous
n
×
56 kbit/s or
n
×
64 kbit/s, where
n
is an
integer from 1 to 24 (If using both ports, neither may be 24).
Interfaces:
ITU-T V.35, RS-449, or EIA 530; DCE to DTE or DCE to DCE
V.35 Signal Levels:
0.55V
±
20% (balanced signals) or +5V to +15V
(unbalanced)
RS449 Signal Levels:
2V to 6V (balanced) per RS422; or 4V to 6V
(unbalanced) per RS423
EIA 530 Signal Levels:
Same as RS449
Channelization:
D4, in accordance with AT&T TR-62411
Clock Signal:
Steady clock at fractional T1 rate
±
32 ppm, 40% to 60% duty
cycle
Clock Jitter:
±
38 nanoseconds, maximum
Loopbacks:
Local and far end on each data channel
Backup Battery Life:
Battery has power for three months without external
power.
Power Requirements
Current Drain:
0.5A (nominal) at +5 V
dc
Power Dissipation:
2.5W (8.4 BTU), nominal
Environmental
Operating Temperature:
32
°
F (0
°
C) to 122
°
F (50
°
C)
Humidity:
95%, non-condensing
Dimensions
Height:
8.05 in. (20.45 cm)
Depth:
8.04 in. (20.42 cm)
Width:
0.96 in. (2.44 cm)
Rear Connector Module Dimensions
DIM 2035 8.44 in (21.4 cm) high
×
2.93 in (7.44 cm) deep
×
0.96 in (2.5 cm) wide
DIM 2449 8.44 in (21.4 cm) high
×
2.75 in (7.0 cm) deep
×
0.96 in (2.5 cm) wide
DIM 2530 8.44 in (21.4 cm) high
×
2.75 in (7 cm) deep
×
0.96 in (2.5 cm) wide
DIM 2435 8.44 in (21.4 cm) high
×
2.93 in (7.4 cm) deep
×
0.96 in (2.5 cm) wide
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 100 101

Comentarios a estos manuales

Sin comentarios