Verilink ConnecT 56K DSU (896-502110-001) Product Manual Manual de usuario descargar pdf (Pagina 59)

3 = CONFIG

ConnecT 56K DS User Manual

3-29

Table 3-15 Network Type Commands

Submenu 5 clock source

The Clock Source options specifies the timing source for the ConnecT

56K DSU s internal circuitry. When Operating on a DDS network, the

timing should be FROM NETWORK. On a point to point private

network, one ConnecT 56K DSU must be set for MASTER, the other set

for FROM NETWORK.

Table 3-16 Clock Source Commands

Used to select the configuration parameters that control the operation of

the DTE Interface of the ConnecT 56K DSU.

Front Panel AT Command Selections Description

1=DDS &L0 Any 4-wire DOS network

2=DDS &L1 ATT&T Switched 56 Service

3=US SPRINT SW56 &L2 Sprint Switched 56 Service

Front Panel AT Command Selections Description

1=MASTER _X0 DSU is the master timing

source

2=FROM NETWORK _X1 Network RX Signal is timing

source

2 = DTE options

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 87 88

Sin comentarios

Verilink ConnecT 56K DSU (896-502110-001) Product Manual Manual de usuario Pagina 59