Verilink C100 (880-502893-001) Product Manual Manual de usuario Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 135
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
Using the Console Port
06/17/97
C100 and C150 T1/FT1 CSU/DSU
5-3
Using the console port
The console is also easy to use because the screen hierarchy is very flat.
In most cases there is only one screen displayed from the Main Menu.
The screen hierarchy is shown in the following illustration.
Figure 5-1 Screen hierarchy T-1 CSU/DSU
Setting up the
terminal
The console port and the ASCII terminal or modem must be
programmed for the same speed to use the console feature. The
settings of the console port on the T-1 CSU/DSU is 9600 bps, 8 data
bits, 1 stop bit and no parity.
After the T-1 CSU/DSU and the VT100 terminal connections have
been cabled, powered up and communicating, the Main Menu show
in Figure 5-2 is be displayed.
When using a single console for multiple units, each unit must be
selected by typing U or u followed by a unit address number of 1
through 8.
Configuration
Main Menu
Local Registers
Diagnostics
& Statistics
Service
Utilities
Register
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 134 135

Comentarios a estos manuales

Sin comentarios