Verilink WANsuite 5370 (34-00310.D) Product Manual Manual de usuario Pagina 58

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 235
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 57
3-28 WANsuite 5370
Figure 3.23
PPP Service Details Screen
ACCM
The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–FFFFFFFF (Hex)
Default: FFFFFFFF
MRU (Maximum
Receive Units)
This configuration option may be set to inform the peer that the
implementation can receive larger packets, or to request that the peer send
smaller packets.
Values: 128–4096
Default: 1500
Port IP Address
The IP address of the port. For unnumbered PPP link, set to 0.0.0.0 and set IP
Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address
The IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP over
Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 03600
Default: 0 (disabled)
Vista de pagina 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 234 235

Comentarios a estos manuales

Sin comentarios