Verilink WANsuite 5370 (34-00310.D) Product Manual Manual de usuario Pagina 183

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 235
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 182
VT100 Interface 4-67
Static TCP Trans Table Screen
The Static TCP Trans Table screen (Figure 4.64) allows static mapping of
global TCP Server ports to a local host IP address/port combination. The
parameters described below enable access to TCP servers on the private/
corporate network “behind the NAT.” The parameters may be used only when
in NAPT mode.
Figure 4.64
Static TCP Translation Table Screen
Global Port
Decimal IP Port exposed to the global Internet. Default is 0.
Server Port
Decimal IP Port of the local TCP Server. This port is usually the same as the
Global Port. Default is 0.
Server Address
IP Address of the local TCP Server. Default is 0.0.0.0.
The “Add New” prompt lets the user add additional addresses.
You can configure or change the above-listed parameters on the Static TCP
Trans Details screen (Figure 4.65), which is accessed by selecting the
appropriate <Ndx> number on the Static TCP Trans Table screen.
Vista de pagina 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 234 235

Comentarios a estos manuales

Sin comentarios