Verilink WANsuite 5370 (34-00310.D) Product Manual Manual de usuario descargar pdf (Pagina 23)

About the WANsuite 5370 1-9

The user-activated input control buttons on the WANsuite 5370 used to access

and set configuration and control options from the LCD menus are described

in the table below.

Rear Panel Connections

The rear panel of the WANsuite 5370 has seven connectors − POWER,

SUPERVISORY PORT, AUX PORT,10/100 ETHERNET, SERIAL INTERFACE

, SERIAL INTERFACE #2, and NET − as shown in Figure 1.2 below.

Figure 1.2

WANsuite 5370 Rear Panel

Supervisory Port

The SUPERVISORY PORT is a DB-9 female DCE connector that supports a

variety of configurable parameters, including port speed, character size, parity,

and stop bits. The Supervisory port speed can be set to 1200, 2400, 4800,

9600, 19200, 38400, 57600, or 115200 bps. Default settings for the

Supervisory port are 19200 bps, 8 bits, no parity, and 1 stop bit.

NOTICE: For information on pinout assignments for the DB-9 female DCE

connector, refer to Supervisory and Auxiliary Port Pin Assignments on

page A-8. See Ordering Information on page A-4 for information on

cables for this connector.

The Supervisory port performs several different functions. It serves as the

VT100 interface port, providing VT100 screens. It also supports asynchronous

PPP, providing access to the Web Server interface. In addition, the

Supervisory port is an asynchronous data port. Data is encapsulated in frame

relay packets and then transmitted through the Network port.

Button Description

EXIT

The EXIT button exits a menu option, which then places the unit in the

next higher level of the menu hierarchy. If you are editing an option,

pressing EXIT exits that screen without saving any changes. If you are in

the main menu, pressing

EXIT logs off the unit.

SCROLL

The SCROLL button lets you review the available options for a given

level in the menu hierarchy or scroll through possible settings for a

parameter. You can also use the

SCROLL button to set alphanumerical

values, where applicable, by scrolling incrementally through digits 0–9

or letters A–Z and a–z.

SELECT

The SELECT button lets you select the currently displayed option or

value for a given field, and enter an “edit” mode for parameters that

require user-specified input. Additionally, you can use the SELECT

button to confirm certain actions or settings.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 234 235

Comentarios a estos manuales

Sin comentarios

Verilink WANsuite 5370 (34-00310.D) Product Manual Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Verilink WANsuite 5370 (34-00310.D) Product Manual