Verilink WANsuite 5330 (34-00302.F) Product Manual Manual de usuario descargar pdf (Pagina 82)

4-4 WANsuite 5330

Figure 4.3

VT100 System Screen

The System screen displays the fields shown in the table below.

NOTICE: Remember that passwords are case-sensitive and are limited to

no more than 10 characters. When logging on, password must be

entered exactly as it was programmed.

The System screen displays the user-selectable prompts listed in the table

below.

Field Description

Contact Read/write field used to store the name of a point-of-contact for

system failure.

Name Read/write field that holds the unit’s name.

Location Read/write field that holds the unit's location.

FrameStart ID Read/write field that holds the unit's ID that uniquely identifies the

unit and is used in the FrameStart applications.

Blank Fields Read/write fields for user-specific labels and values. Information

resides in non-volatile memory.

Time Read/write field that holds the unit's internal time setting in

standard 24-hour HH:MM:SS format.

Date Read/write field that holds the unit’s internal time setting in

standard MM:DD:YY format.

New Password Lets you modify your password by typing in a new password.

Acceptable characters for use in a password are digits 0–9 and

letters A–Z and a–z, for a total of 62 distinct characters.

Prompt Function

Maintenance Resets Brings up a screen where you can reset unit to its default TDM,

Packet, or Packet 4 configuration.

Save and Restart Saves the current configuration and restarts.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 134 135

Sin comentarios

Verilink WANsuite 5330 (34-00302.F) Product Manual Manual de usuario Pagina 82